Napoleon Huntsville 1100PL Leg Stove - Discontinued
Napoleon · 1 document
About
The Napoleon Huntsville 1100PL Wood Stove is a highly efficient leg model stove which not only looks great, but provides a lot of reliable heat which can be easily adjusted by the single lever burn control.
The leg model is available in two different sizes - see specs below. (No longer available in green)
The easy operation of a single lever burn control regulates primary and secondary air establishing a perfect mixture and providing a clean burn.
EPA approved to Phase 2 of the 1990 test Standards and below Washington's DEQ Phase 3 with emissions as low as 3.7 grams per hour.
The 6" flue assures you of efficiency and cost saving installations.
Secondary air tubes insulated with ceramic fiber and protected with a stainless steel cover plate ensures complete combustion.
Upper firebox lined with ceramic fiber baffles. The advantage of light weight ceramic is three fold:
Ease of installation: only two pieces
Lighter, easier to handle.
The thermal dynamics of ceramic fiber allows for quicker startup and a hotter, cleaner burn
Non-catalytic high tech design eliminates the need for a delicate ceramic catalytic combustor which can deteriorate over time.
Large viewing area -- air wash in combination with high temperatures keeps the viewing glass clean
President's Limited Lifetime Warranty
Specifications
| Specifications | The Napoleon Huntsville 1100PL Wood Stove |
| Emissions (grams per hour) | 4.1 |
| Width x Height x Depth | 25 1/2" x 33 1/4" x 22 1/2" |
| Firebox Chamber (W.H.D.) | 18" x 12" x 13 1/2" |
| Firebox Capacity | 1.7 cu. ft. |
| Door Size (height x width) | 14 3/4" x 19 3/8" |
| Weight without bricks | 215 lb. |
| Weight of Bricks | 110 lb. |
| Approximate Area Heated* sq. ft. | 600 - 1,500 |
| Heat output BTU/h** | 11,700-42,200 |
| Heat output BTU/h (high burn)*** | 55,000 BTU |
| Burn Time (low fire)* | 7 hours |
| Catalytic Combustor | no |
| Mobile Home approved | no |
| R-2000 approved (Canada) | yes |
| Max. Log Size | 18" |
| Outside Combustion Air | no |
| Flue diameter | 6" |
| Flue size prefabricated | 6" |
| Minimum Clearances with Single Wall Chimney Connector from Stove to Combustibles | |
| Rear | 10" |
| Side | 12" |
| Corner | 6" |
| Minimum Clearances with Approved Double Wall Pipe from Stove to Combustibles | |
| Rear | 6" |
| Side | 10" |
| Corner | 2" |
Photos
Need help with this?
We have sold and serviced these appliances since 1999. If you need a part or advice, call us.
406-300-1776