Buck Stove Buck Bay Series 18 Stove or Insert - Discontinued — Manual

This product has been discontinued in the USA as it does not meet 2020 EPA Emission Standards. This page exists for informational purposes only.

The Buck 18 Non-Catalytic Stove body can be installed as either a freestanding wood stove (with the choice of leg or pedestal option) or as an insert model (with the choice of surround and trim kit). The Buck Stove Company established in 1975 is known for quality hand-crafted, secondary combustion designed, American made products, at an affordable cost.

The Buck Model 18 is a highly efficient non-catalytic wood stove designed as a masonry or pre-fab fireplace insert. Used as a freestanding stove with the optional pedestal or traditional Queen Anne legs, or as an insert with surround option. The Buck Model 18 Wood unit is rated at 22,400 BTU's and can heat up to 1200 square feet (depending on the design and layout of your home). The 17-3/4" height allows the Buck Wood Burning Model 18 to fit almost any U.L.listed pre-fab fireplace. 3.0 grams meets and exceeds Washington State emission standards! The Buck 18 Non-Catalytic Stove body can be installed as either a freestanding wood stove (with the choice of leg or pedestal option) or as an insert model (with the choice of surround and trim kit). The Buck Stove Company established in 1975 is known for quality hand-crafted, secondary combustion designed, American made products, at an affordable cost.

Features

• Heat Capacity - 800 - 1,200 Sq. Feet
• EPA Tested Output BTU/H - 22,400
• Emissions G/H- 3.0
• Firebox Volume - 1.3 Cubic Feet
• Max Firewood Length - 16"
• This model comes with a blower
• Flu Size - 6"
• Efficiency - 63%
• This model is Pre Fab Approved
• This model is mobile home approved++
• Weight - 326 Lbs
• American Made in the U.S.A.
• Unmatched Product, Unmatched People, Unmatched Pride
• Handcrafted design and workmanship

Options