Osburn 5000 Pellet Stove - Discontinued — Installation Manual
Osburn · Installation Manual · PDF, 4.3 MB
About the Osburn 5000 Pellet Stove - Discontinued
This product has been discontinued as it does not meet 2020 EPA Emission Standards. This page exists for informational purposes only.
The Osburn 5000 adds a modern flare to the increasingly amazing technology of the Osburn pellet stove line. The company has been evolving their design reaching to be the best of the best when it comes to using solid fuel sources for heating.
The Osburn 5000 adds a modern flare to the increasingly amazing technology of the Osburn pellet stove line. The company has been evolving their design reaching to be the best of the best when it comes to using solid fuel sources for heating. The Osborn 5000 has included bottom feed technology which not only does the bottom feed technology provide flexibility in regards to the quality of pellet required (or ability to use different forms of solid biofuels) it also provides a more complete burn due to the tight mass that is created as it feeds the pellets in. On top of all that, it also pushes the ashes into ashpan as it feeds, reducing the risk of clickers ( ash that reignites upon the introduction of oxygen)
FEATURES
- Model #: OP00050
- High-efficiency appliance EPA approved
- Recommended Heating Area (sq. ft.): 750 - 2,400
- Electronic igniter
- Thermostatic or manual mode
- Mobile Home Approved
- Color : Metallic black
- Easy-to-access ash drawer
- Glass air-wash system
- Optimum efficiency: 78%
- Emissions (grams/hour): < 2.5 g/h
- Combustion Technology: bottom-feed
- Hopper capacity: 70 lb (32 kg)
- Recommended chimney diameter: 3"
- Number of intensity levels: variable
- Maximum Capacity: 50,000
- Minimum Capacity: 8,500
- Tested and/or listed as per applicable standards by: Intertek
Specifications
| Osburn 5000 Pellet Stove | Technical Specifications |
| Height - Overall | 36 1/2" |
| Width - Overall | 23-5/8" |
| Depth - Overall | 31 1/2" |
| Weight | 430 lb (195 kg) |
| Canadian Standard (emissions) | CSA B415.1-10 |
| USA standard (emissions) | EPA |
| Canadian Standard (safety) | ULC-s627, ASTM E1509 |
| USA standard (safety) | UL 1482 |
| Type of Fuel | Pellet |
| Type of Door | Single, glass with cast iron frame |
| Glass Type | Ceramic glass |
| Recommended Heating Area | 750 - 2,400 sq. ft. |
| Mobile Home Approved | Yes |
| Optimum efficiency | 78% |
| Emissions | < 2.5 grams/hour |
| Combustion Technology | bottom-feed |
| Hopper capacity | 70 lb (32 kg) |
| Recommended chimney diameter | 3" |
| Number of intensity levels | variable |
| Maximum Capacity | 50,000 BTU/h |
| Minimum Capacity | 8,500 BTU/h |
| Warranty | Limited lifetime |
| Tested or/and listed as per applicable standards by | Intertek |
| Minimum clearances to combustibles * | (Data expressed in inches. 1 inch = 25.4 mm) |
| Back Wall | 3" |
| Sides | 4" |
| Corners | 3" |
Photos



Need help with this?
We have sold and serviced these appliances since 1999. If you need a part or advice, call us.
406-300-1776More from Osburn
- Owner's Manual – Osburn 7000 Pellet Stove - Discontinued
- Diagram – Osburn 7000 Pellet Stove - Discontinued
- Trouble Shooting – Osburn 3000 Pellet Stove - Discontinued
- How to Replace Ignitor – Osburn 3000 Pellet Stove - Discontinued
- Manual – Osburn 3000 Pellet Stove - Discontinued
- How to Access Fuses – Osburn 3000 Pellet Stove - Discontinued
- Diagram – Osburn 3000 Pellet Stove - Discontinued
- How to Replace Convection Blower – Osburn 3000 Pellet Stove - Discontinued
- How to Replace Rotative Valve – Osburn 3000 Pellet Stove - Discontinued
- How to Replace Combustion Blower – Osburn 3000 Pellet Stove - Discontinued
- Components Locations – Osburn 3000 Pellet Stove - Discontinued
- How to Replace L-250 Thermodisc – Osburn 3000 Pellet Stove - Discontinued