Osburn 7000 Pellet Stove - Discontinued

This product has been discontinued as it does not meet 2020 EPA Emission Standards. This page exists for informational purposes only.

Osburn really turns up the heat with this modern pellet stove. Cutting-edge, bottom-fed combustion technology and a hopper capacity of 125 pounds allows the Osburn 7000 a combustion time of up to 92 hours while, the 70,000 BTU/h heating capacity combined with the 500 CFM blower make heating your home easier than ever! The Osburn 7000 stays true to the modern design by including an intuitive touchscreen display for user-friendly control. This stove, with two door overlay design options, adds the finishing touch to your contemporary style.

•     Modern pedestal design and innovative bottom fed combustion system.
•     User friendly electronic ignition.
•     Has the ability to operate in thermostatic or manual mode.
•     Easy to operate touchscreen
•     Mobile home approved
•     Equipped with a thermodisc
•     Choose from 2 door overlay options
•     500CFM Blower included
•     High Quality Stainless Steel Baffle

With the proper maintenance, your Osburn 7000 Pellet Stove will allow for many years of comforting heat. It is recommended to maintain a regular cleaning schedule of your unit to ensure maximum performance.
Example Maintenance Schedule:

* Cleaning frequency may vary depending on the type of fuel used. Fuel with higher ash content will increase cleaning frequency.

Each type of pellet has it's own properties and will burn differently. This also applies to the amount of ashes that will be produced. Conventional pellets are 1/4" or 5/16" in diameter and not over 1" long. Pellets that excede these measurements will prevent proper pellet feed. In addition, pellets that are very short will accumulate and pile into the feed screws more easily, causing a more dense volume, increasing the BTU. The contrary is true for longer pellets, which pile less, reducing the BTU potential.