XTD 1.9-I Flame Energy Wood Burning Insert - Discontinued

This product was discontinued in 2016.  This page is provided for informational purposes. 

Built by SBI (Osburn), these continuously welded, uni-body steel wood inserts are manufactured in North America with North American steel by Flame Energy.

The Flame Energy XTD 1.9-I wood burning insert is ideal for increasing the efficiency of a fireplace, allowing it to heat every room evenly. Designed to be installed into an existing wood burning fireplace, you can keep the classic look of your fireplace and enhance heat efficiency. Open burning fireplaces are inefficient, burning rapidly, putting off little heat into your living area, and pulling large volumes of air out of the home and up the chimney with most of the heat from the fireplace. The Flame insert allows a long burn time using little wood while providing an air-tight, efficient combustion. Holding logs up to 20 inches long, the firebox is 2.3 cubic feet and allows output up to 75,000 BTUs, effectively heating up to 2,100 square feet of space. The insert includes a heat activated 130 cfm fan kit, but a Faceplate and Faceplate Trim Kit are required to complete the appliance. In addition, a 6" stainless steel chimney liner kit is also recommended for the purposes of safety and optimum operational performance. If you wish to install the insert into a fireplace on an exterior wall with an exposed chimney you should also consider installing a Draw Collar to avoid draft problems.

Features

• Model Number: FL-061W
• Maximum heat output of 75,000 BTU
• Includes a heat-activated, 120 CFM blower
• 2.1 cubic foot firebox
• Maximum log length of 20 inches
• Air-wash system
• Optimum efficiency : 77.2%
• May qualify for some government incentives.
• Tested by Intertek as per applicable standards (CSA/UL/ULC and/or others)

Options

• Faceplate kit (29" x 44") (AC03410)
• Faceplate kit (32" x 50") (AC03411)
• Black (OA10122), brass (OA10121) or brushed nickel (OA10123) finish faceplate trim kit (29" x 44")
• Black (OA10128), brass (OA10127) or brushed nickel (OA10129) finish faceplate trim kit (32" x 50")
• Heat shield for surround / shelf (AC01317)
• Fire screen (AC01315)
• Fresh air kit adapter (5" diameter) (AC01298)
• Liner fastening system (AC02006)
• Liner offset adaptor (AC01370)