PSG Caddy Alterna II - Discontinued — Diagram

This product has been discontinued and is no longer available. This page is for informational purposes only.

The Caddy Alterna II from PSG is a 120,000 BTU warm air pellet furnace. With a 240 pound hopper capacity and efficiency topping the 81% mark, it is the perfect heating device for the coldest North American winters.

You spoke, they listened, introducing the newly redesigned Caddy Alterna II Pellet Furnace! Answering the call of homeowners looking for the comfort of a wood-heating system without the inconvenience, and tested to the highest standards set by the EPA and CSA B415.1-10. The Caddy Alterna II is available in both pellet unit or a pellet/electric combination unit to fulfill everyone's needs, pleasing even the most discerning folk looking for an Eco-friendly, efficient heating solution. 

Thanks to it's 240 lbs hopper capacity, the Caddy Alterna II provides great heating autonomy, and by adding the optional electrical system, it can continue to operate once the pellets have run out. To top that tidbit off, PSG has made certain components maintenance free meaning no need to adjust, calibrate, or oil, and a self-diagnostics electronic interface prevents unnecessary service calls. And of course you can't forget the the self-cleaning bottom feeder that keeps the burn pot free of deposits. 

Let the Caddy Alterna II show you what the definition of unmatched reliability means, with every component carefully selected and sourced from reputable vendors. With an all stainless steel combustion chamber and burn pot, the heart of your Caddy Alterna II is guaranteed to last. Never be dependent on a single source of energy to bring comfort and safety to your family again.

 

 

Features

• The Alterna can use : standard wood pellets, sawdust / hay mix pellets, 100% bark pellets, or switch grass pellets
• Input capacity: 101,000 BTU (29.6 kW)
• Loading capacity: up to 240 lbs
• Efficiency : 82.4%
• Exhaust pipe diameter: 4"
• Furnace exterior dimensions: 49 1/2” X 29 3/8” X 57 5/8”
• Hot air plenum dimensions: 22"W x 22"D
• Air return plenum – dimensions (Depth or Height X Width) 16” X 21 1/4”
• G-10 blower with 1/2 hp motor - theoretical 1650 CFM
• Qualifies for the USA tax credit (USA only)

 

 

 

Options

Air Diffuser	Auxiliary Discharge System	Electric Element
Fresh Air Intake Kit	Hot Water Loop Kit	Insulated Flex Pipe for Fresh Air Intake Kit
Leg Assembly for Discharge Tank	Orifice for Evaporator Coil	Stand Alone Auxiliary Discharge Tank
Storage Tank Extension	Storages Tank w/ Pneumatic Self Feeding Pellet System	TX Valve for Evaporator Coil
Uncased Air Conditioning Coil

 

 

Old Style Model

 

 ....................