PSG Caddy EPA Wood Furnace - Discontinued — Installation Manual
PSG · Installation Manual · PDF, 11.2 MB
About the PSG Caddy EPA Wood Furnace - Discontinued
This product has been discontinued and is no longer available. This page is for informational purposes only.
Specifically designed to meet the highest combustion standards in North America today, set by the EPA, the Caddy is the cleanest and most efficient furnace ever produced by PSG. Achieving savings in wood heating up to 30% and particulate emission reduction reaching 80%, take one look at the fire through the glass door of the Caddy and you'll see the difference.
Introducing the Cadillac of Furnaces - PSG Caddy EPA Wood Furnace! Using advanced combustion technology and state of the art design, the Caddy has earned the reputation of the cleanest and most efficient furnace ever to come from the PSG line. By adding performance enhancing electronics, PSG has taken this furnace to the next level!
The newly redesigned Caddy has reduced it's electronic components to improve ease of use and efficiency to just three, a blower assembly equipped with a prewired main power board for convenient plug and play installation, an integrated PC board and RTD probe to control plenum temperatures and control blower speed to optimize home comfort and furnace performance, and finally a touch screen LCD control module for easy input/output control.
With a unique heat exchanger system, the Caddy is able to provide outstanding performance by ensuring heat is transferred quickly and efficiently through the smoke ducts inside the furnace instead of being lost going up the chimney. Using 30% less firewood, and reducing particulate emissions by up to 80%, you're helping both the environment and your pocket book.
The Caddy is available in four different configurations, Wood only - Wood & Electric - Wood & Oil - or Wood Add-on Furnace.
Features
- Up to 49,638 BTU's
- Log Length up to 22"
- Furnace exterior dimensions : 26"W x 47"D x 48"H
- Firebox dimensions : 17”W x 22 5/8”D x 16”H
- Glass door with cast iron frame
- EPA approved wood furnace
Options
|
Blower Assembly Required for All Unit Types |
Electrical Element Required for Wood/Electric Unit Types |
Beckett Oil Unit Required for Wood/Oil Unit Types |
|
Riello Oil Unit h Required for Wood/Oil Unit Types |
Fan Relay Required for Wood Add-on |
.Fresh Air Intake Adaptor |
|
Air Diffuser Kit |
Top Air Return Plenum Kit |
Orifice for Evaporator Coil |
|
TX Valve for Evaporator Coil |
Uncased Air Conditioning Coil |
Old Model Style
Specifications
| Appliance Performance | |
| Fuel Type | Wood or Wood-Electric Combination |
| Firebox Volume | 3.6 cu. ft |
| Max Burn Time | 15 hrs. |
| Heating Area | 1,000 - 2,500 sq. ft |
| Overall Heat Output Rate | 15,436 BTU/hr - 49,638 BTU/hr (4.5 kW - 14.5 kW) |
| Max input capacity | 310,000 BTU |
| Average Overall Efficiency | 76.7% HHV 82.9% LHV |
| Delivered Heat Output Rate | 12,635 BTU/hr - 44,857 BTU/hr |
| Average Delivered Efficiency | 62.7% HHV 68.3% LHV |
| Optimum Efficiency | 84.9% |
| General Specifications | |
| Average Electrical Power Consumption | 432 Wh |
| Chimney Diameter | 6" |
| Flue Outlet Diameter | 6" |
| Baffle Type | High Heat-resistant C-cast |
| Weight | 576 lbs (259 kg) |
| Blower 1/3 HP 4 speed Direct drive | 1,300 cfm |
| Filters - Dimensions (W x H x D) | 14" x 25" x 1" |
| Filter Quantity | 1 |
| Air Return Plenum - Dimensions (Depth or Height) | 15 3/4" |
| Air Return Plenum - Dimensions (Width) | 24 3/4" |
| Hot Air Plenum - Dimensions (Depth or Height) | 28 5/8" |
| Hot Air Plenum - Dimensions (Width) | 24 1/2" |
| Overall Dimensions (W x D x H) | 32 1/4" x 52 7/8" x 49" |
| Door Opening Dimensions (H x W) | 10" x 13 3/4" |
| Glass Surface Dimensions (W x H) | 12 1/2" x 10 1/8" |
| Door Type | Single, Glass w/ Cast-Iron Frame |
| Glass Type | Ceramic Glass |
| Firebox Dimensions (H x W x D) | 16" x 17" x 22 5/8" |
| Steel Thickness (Body & Top) | 3/16" & 1/4" |
| Center Line of Flue Outlet to the Side | 12 7/8" |
| Center Line of Flue Outlet to the Top | 44" |
| Wood Add-on - Location of the connection w/ existing furnace | Left or Right |
| Wood Add-on - Air inlet Duct Dimensions (H x W) | 14 1/2" x 22" |
| Minimum Clearances | |
| Front | 48" |
| Back | 24" recommended for servicing |
| Sides | 24" recommended for servicing |
| Ducts | 6" for 1st 6' and 1" thereafter |
| Recommended Clearance | 24" (blower maintenance) |
| Warranty | Limited Lifetime |
| Emissions Rate | 6.56 grams/hr |
| USA & Canada Emission Standard | EPA / CSA B415.1-13 |
| USA Safety Standard | UL 391 3e |
| Canadian Safety Standard | CSAB3661.1/CSA C22.2 no 236 CSA B140.4 CSAB212-93 |
Photos
Need help with this?
We have sold and serviced these appliances since 1999. If you need a part or advice, call us.
406-300-1776More from PSG
- Brochure – PSG Caddy Alterna II - Discontinued
- Diagram – PSG Caddy Alterna II - Discontinued
- Owner's Manual – PSG Caddy Alterna II - Discontinued
- Document – PSG Caddy Manaul 09 07 2018
- Manual – MaxCaddy Manual.2018pdf
- Brochure – PSG Mini Caddy EPA Wood Furnace - Discontinu
- Owner's Manual – PSG Mini Caddy EPA Wood Furnace - Discontinu
- Dimensions – PSG Mini Caddy EPA Wood Furnace - Discontinu
- Brochure – PSG Caddy EPA Wood Furnace - Discontinued
- Diagram – PSG Caddy EPA Wood Furnace - Discontinued
- Brochure – PSG Max Caddy EPA Wood Furnace - Discontinue
- Diagram – PSG Max Caddy EPA Wood Furnace - Discontinue