Flame Energy Flame Monaco XL EPA Zero Clearance Fireplace - Discontinued — Manual
Flame Energy · Manual · PDF, 14.5 MB
About the Flame Monaco XL EPA Zero Clearance Fireplace - Discontinued
This product has been discontinued as it does not meet 2020 EPA Emission Standards. This page exists for informational purposes only.
The Flame Monaco XL has an intelligent design that combines high energy efficiency with low emissions. It features a 4.3 cubic foot firebox, allowing for enough wood for up to 10 hour burn times. This fireplace has been designed to comply with the EPA’s clean-air standards (only 1.6 g/hr of emissions). With its large viewing windows, this fireplace is sure to become the centerpiece of any room.
Note: This product includes the Facade and Brick Panels that are required to complete the installation.
Features
- 4.3 cu. ft. Firebox Recieves Logs up to 25"
- 10 Hour Burn Time
- 95,000 BTU
- 69.7% Efficiency
- 1.6 g/hr. Emissions
- UL Tested
- Uses 8" DuraTech Chimney
- Heats up to 2800 sq. ft using a 176 CFM blower
- Limited Lifetime Warranty
Specifications
| Specifications | Flame Monaco EPA Zero Clearance Fireplace |
| Heat Area | 1000-2800 sq. ft. |
| Max Burn Time | 10 Hours |
| Firebox Volume | 4.3 Cubic Feet |
| Overall Dimensions | 50-3/4"W x 32-1/4"D x 43-3/8"H |
| Front Section Dimensions | 45-1/4"W x 40-7/8"H |
| Maximum Heat Output | 95,000 BTU |
| Emissions US EPS | 1.6g/hr |
| Efficiency | 69.7% |
| Weight | 665 lbs. |
| Flue Pipe Diameter | 8" DuraTech |
| Warranty | Limited Lifetime |
Photos
Need help with this?
We have sold and serviced these appliances since 1999. If you need a part or advice, call us.
406-300-1776